Rear Power Window LH Auto Up / Down Function Does Not Operate With Rear Power Window Switch LH
Rear Power Window LH Auto Up / Down Function Does Not Operate With Rear Power Window Switch LHDESCRIPTION
If the AUTO UP/DOWN function does not operate, the cause may be one or more of the following:
- The recorded power window fully closed position, which is stored in the multiplex network switch, was erased as a result of: 1) a fuse or relay to the rear door LH power window being replaced; or 2) the battery cable and the switch's connector being disconnected.
- The switch has a malfunction.
- The pulse sensors in the power window regulator motor LH rear have a malfunction.
- The wiring between the switch and the power window regulator motor LH rear is open or short.
WIRING DIAGRAM
Wiring Diagram:
INSPECTION PROCEDURE
Step 1 - 2:
Step 2(Continued) - 4:
