DTC 65

DTC C1344/65 Rear Hydraulic System LH Malfunction

DESCRIPTION

DTC Detection Condition:

The skid control ECU inputs the operating fluid pressure of each wheel cylinder using the wheel cylinder pressure sensors in order to control the braking force of each wheel.

DTCs may be stored if one of the following occurs:
- Brake fluid leaks
- Wheel cylinder vibrates due to uneven wear of brake disc rotor
- Foreign matter enters solenoid valve
- Line pressure drops during air bleeding
- Disc brake pad is replaced
- Rotor is replaced

If DTCs are output, perform a DTC clear. Clearing Diagnostic Trouble Codes

Wiring Diagram:

Step 1-3:

Step 3(Continued)-5:

Step 5(Continued)-6:

INSPECTION PROCEDURE

NOTE: When replacing the brake actuator, perform initialization of linear solenoid valve and calibration. Initialization

HINT: When C1364/61 is output together with C1341/62, C1342/63, C1343/64 and C1344/65, inspect and repair the trouble areas indicated by C1364/61 first.