Operation CHARM: Car repair manuals for everyone.
Home >> Lexus >> 2007 >> GS 450h V6-3.5L (2GR-FSE) Hybrid >> Repair and Diagnosis >> Body and Frame >> Mirrors >> Memory Positioning Systems >> Memory Positioning Switch >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Memory Positioning Switch: Service and Repair

SEAT MEMORY SWITCH

Seat Memory Switch:






REMOVAL

HINT: Use the same procedures for the RH and LH side.






1. REMOVE DOOR INSIDE HANDLE BEZEL
a. Using a screwdriver, detach the 3 claws and remove the bezel.

HINT: Tape the screwdriver tip before use.

2. REMOVE FRONT DOOR TRIM PANEL ASSEMBLY






a. Detach the 2 claws and remove the trim lower cover.






b. Remove the screw.
c. Using a clip remover, detach the 9 clips and remove the trim cover.






d. Disconnect the 2 cables from the inside handle.






3. REMOVE SEAT MEMORY SWITCH LH
a. Disconnect the connector.
b. Remove the 2 screws and memory switch.

INSTALLATION

HINT:
- Use the same procedures for the RH and LH side.
- A bolt without a torque specification is shown in the standard bolt chart.






1. INSTALL SEAT MEMORY SWITCH
a. Install the switch with the 2 screws.
b. Connect the connector.

2. INSTALL FRONT DOOR TRIM PANEL ASSEMBLY






a. Connect the 2 cables to the inside handle.
b. Attach the 9 clips and install the trim cover.






c. Attach the 2 claws to install the trim lower cover.
d. Install the screw.






3. INSTALL DOOR INSIDE HANDLE BEZEL
a. Attach the 3 claws to install the bezel.
pro multis · About Operation CHARM