Operation CHARM: Car repair manuals for everyone.
Home >> Lexus >> 2007 >> GS 450h V6-3.5L (2GR-FSE) Hybrid >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Testing and Inspection >> Scan Tool Testing and Procedures >> Inspection Mode Procedure
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Inspection Mode Procedure

INSPECTION MODE PROCEDURE

HINT: Before performing the DATA LIST and ACTIVE TEST of the engine with the intelligent tester, be sure to put the system into the inspection mode using the following procedures.

ACTIVATING INSPECTION MODE

a. Not using intelligent tester
1. Perform the following steps in 60 seconds.
1. Turn the power switch ON (IG).
2. Fully depress the accelerator pedal twice with the transmission in the P position.
3. Fully depress the accelerator pedal twice with the transmission in the N position.
4. Fully depress the accelerator pedal twice with the transmission in the P position.
5. Check that the "MAINTENANCE MODE" on the multi-information display is illuminated in the combination meter.
6. Turn the power switch ON (READY).

2. To end inspection mode, turn the power switch OFF.

b. Using intelligent tester
1. Connect the intelligent tester to the DLC3
2. Turn the power switch ON (IG).
3. Turn tester ON.
4. Enter the following menus: DIAGNOSIS / OBD/MOBD / HV ECU / ACTIVE TEST / INSPECTION MOD1 / ON.
5. Check that the "MAINTENANCE MODE" on the multi-information display is illuminated in the combination meter.
6. Turn the power switch ON (READY).
7. To end inspection mode, turn the power switch OFF.
pro multis · About Operation CHARM