Slip Indicator Light Remains ON

Slip Indicator Light Remains ON

DESCRIPTION

The skid control ECU is connected to the combination meter via CAN and multiplex communications. The SLIP indicator blinks during VSC and/or TRAC operation.

When the system fails, the SLIP indicator comes on to warn the driver.

The SLIP indicator comes on when traction control and VSC are terminated by pressing the VSC OFF switch.

Wiring Diagram:

Step 1-4:

Step 4(Continued)-6:

Step 7-8:

INSPECTION PROCEDURE

NOTE: When replacing the skid control ECU, perform zero point calibration and store system information. Vehicle Stability Control System (W/ VDIM)