Without Scan Tool

DTC CHECK / CLEAR





1. DTC CHECK (USING SST CHECK WIRE)
(a) Check DTCs.
(1) Using SST, connect terminals TC and CG of the DLC3.
SST 09843-18040
(2) Turn the engine switch on (IG).





(3) Read and record any DTCs indicated by the multi-information display on the combination meter.

HINT:
^ If the multi-information display does not indicate any DTCs or the normal system code, inspect the multi-information display or TC and CG terminal circuit.





^ If 2 or more malfunctions are indicated at the same time, the lowest numbered DTC is displayed first.

(4) Refer to the Diagnostic Trouble Code Chart for DTC information. Tire Pressure Warning System
(5) After completing the check, turn the engine switch off and remove the SST from the DLC3.
SST 09843-18040





2. DTC CHECK (USING INTELLIGENT TESTER)
(a) Check DTCs.
(1) Connect the intelligent tester to the DLC3.
(2) Turn the engine switch on (IG).
(3) Read the DTCs following the prompts on the tester screen.

HINT: Refer to the intelligent tester operator's manual for further details.

3. DTC CLEAR

HINT: After repairing the malfunctions, clear the DTCs.

(a) Connect the intelligent tester to the DLC3.
(b) Turn the engine switch on (IG).
(c) Clear the DTCs following the prompts on the tester screen.

HINT: Refer to the intelligent tester operator's manual for further details.