Crankshaft Main Bearing
CrankshaftMain Journal
Diameter 60.988 to 61.000 mm (2.4011 to 2.4016 inch)
Maximum Taper & Out-of-Round 0.02 mm (0.0008 inch)
Maximum Circle Runout 0.06 mm (0.0024 inch)
Crank Pin
Diameter 47.992 to 48.000 mm (1.8894 to 1.8898 inch)
Maximum Taper & Out-of-Round 0.02 mm (0.0008 inch)
Thrust Clearance
Standard 0.020 to 0.220 mm (0.0008 to 0.0087 inch)
Maximum 0.30 mm (0.0118 inch)
Thrust Washer Thickness 2.43 to 2.48 mm (0.0957 to 0.0976 inch)
Main Bearing Oil Clearance
Standard 0.026 to 0.047 mm (0.0010 to 0.0019 inch)
Maximum 0.050 mm (0.0020 inch)
Main Bearing Cap Lower Bolts
First Pass 61 Nm (622 kgf-cm, 45 ft. lbs.)
Final Pass 90°
Bolt Length:
Main Bearing Cap Side Bolts 26 Nm (265 kgf-cm, 19 ft. lbs.)