Operation CHARM: Car repair manuals for everyone.
Home >> Lexus >> 2007 >> IS 250 RWD V6-2.5L (4GR-FSE) >> Repair and Diagnosis >> Starting and Charging >> Starting System >> Ignition Switch >> Service and Repair >> Removal and Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Removal and Replacement

Engine Switch:




Engine Switch:




ENGINE SWITCH

REMOVAL

1. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transmission)
2. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transmission)
3. REMOVE UPPER NO.1 CONSOLE PANEL GARNISH (for Automatic Transmission)
4. REMOVE UPPER NO.2 CONSOLE PANEL GARNISH (for Automatic Transmission)
5. REMOVE CONSOLE PANEL SUB-ASSEMBLY (for Automatic Transmission)
6. REMOVE REAR CONSOLE PANEL SUB-ASSEMBLY (for Manual Transmission)
7. REMOVE FRONT CONSOLE PANEL SUB-ASSEMBLY (for Manual Transmission)
8. REMOVE FRONT ASH RECEPTACLE SUB-ASSEMBLY
9. REMOVE CONSOLE BOX REGISTER ASSEMBLY
10. REMOVE CONSOLE BOX
11. REMOVE NO.3 INSTRUMENT PANEL REGISTER ASSEMBLY
12. REMOVE CENTER LOWER INSTRUMENT CLUSTER FINISH PANEL
13. REMOVE INTEGRATION CONTROL PANEL WITH RADIO RECEIVER ASSEMBLY (w/o Navigation System)
14. REMOVE MULTI-DISPLAY WITH RADIO RECEIVER ASSEMBLY (w/ Navigation System)




15. REMOVE ENGINE SWITCH
a. Disconnect the switch connector.
b. Detach the 2 claws and remove the switch.

INSTALLATION




1. INSTALL ENGINE SWITCH
a. Attach the 2 claws to install the switch.
b. Connect the switch connector.

2. INSTALL INTEGRATION CONTROL PANEL WITH RADIO RECEIVER ASSEMBLY (w/o Navigation System)
3. INSTALL MULTI-DISPLAY WITH RADIO RECEIVER ASSEMBLY (w/ Navigation System)
4. INSTALL CENTER LOWER INSTRUMENT CLUSTER FINISH PANEL
5. INSTALL NO.3 INSTRUMENT PANEL REGISTER ASSEMBLY
6. INSTALL CONSOLE BOX
7. INSTALL CONSOLE BOX REGISTER ASSEMBLY
8. INSTALL FRONT ASH RECEPTACLE SUB-ASSEMBLY
9. INSTALL FRONT CONSOLE PANEL SUB-ASSEMBLY (for Manual Transmission)
10. INSTALL REAR CONSOLE PANEL SUB-ASSEMBLY (for Manual Transmission)
11. INSTALL CONSOLE PANEL SUB-ASSEMBLY (for Automatic Transmission)
12. INSTALL UPPER NO.2 CONSOLE PANEL GARNISH (for Automatic Transmission)
13. INSTALL UPPER NO.1 CONSOLE PANEL GARNISH (for Automatic Transmission)
14. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transmission)
15. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transmission)
pro multis · About Operation CHARM