Component Tests and General Diagnostics

INSPECTION
1. INSPECT TIRE
(a) Check the tires for wear and proper inflation pressure.

Cold tire inflation pressure:

(b) Using a dial indicator, check the tire runout (vertical and horizontal).
Tire runout: 1.4 mm (0.055 in.) or less





2. ROTATE TIRES
(a) See the illustration for where to rotate each tire.





3. INSPECT WHEEL BALANCE
(a) Check and adjust the off-the-car balance.
(b) If necessary, check and adjust the on-the-car balance.
Imbalance after adjustment: 8.0 g (0.018 lb) or less
4. INSPECT BEARING LOOSENESS
5. INSPECT AXLE HUB RUNOUT