Repair Instruction - Customize Parameters
CUSTOMIZE PARAMETERSHINT: The following items can be customized.
NOTE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Be sure to make a note of the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
1. POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM
2. AIR CONDITIONING SYSTEM
3. THEFT DETERRENT SYSTEM
4. LIGHTING SYSTEM
5. WIPER AND WASHER SYSTEM
6. POWER DOOR LOCK CONTROL SYSTEM
7. WIRELESS DOOR LOCK CONTROL SYSTEM
8. METER / GAUGE SYSTEM
a. BUZZER ON/OFF SETTING
The buzzer ON/OFF setting, which is a setting of the buzzer function of the combination meter, can disable the driver side seat belt buzzer and front passenger side seat belt buzzer.
NOTE: Basically, these buzzers should be set on for safe driving. Perform the procedures only if it is necessary to set the buzzer off.
"SEAT BELT BUZZER OFF" indicates that the buzzer is OFF. "SEAT BELT BUZZER ON" indicates that the buzzer is ON. The buzzer ON/OFF setting will be finished (the odometer will display "ODO") if the ODO/TRIP switch is not operated for 10 seconds or more. In this case, perform step 11 to check that the buzzer ON/OFF setting is complete. If it is not complete, start from step 1 again.
NOTE: When either the battery cable or the combination meter connector is disconnected, these buzzers are set on.
b. OTHER PARAMETERS (Using Intelligent tester)
c. TIME ZONE SETTING (w/ Navigation System)
9. POWER WINDOW CONTROL SYSTEM
10. POWER BACK DOOR SYSTEM
Part 1:
Part 2:
11. SLIDING ROOF SYSTEM CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER (REFERENCE)