Interior - Driver Seat/Headrest Position Initialization

PRE-DELIVERY SERVICE
PD061-07

Title:
INITIALIZATION OF DRIVER'S SEAT POSITION & HEAD RESTRAINT HEIGHT

Models:
'08 GS 350/460

October 4, 2007

Introduction
The head restraint height of the driver's seat is automatically adjusted according to the driver's seat position. This height has been set to the default position at the assembly plant so that it will be in the upper-most position when the seat is moved to the rear-most position. However, the head restraint position may have changed during transit and storage.

Initialize the head restraint during Pre-Delivery Service (PDS) to ensure that it is set to the default position.

Applicable Vehicles

^ 2008 model year GS 350/460 vehicles.

Initialization Procedure





1. Turn the ignition switch to the "ON" position.

2. Manually set the head restraint upward to the highest position.





3. Move the seat backward to the rear-most position until the seat motor stops.

4. Move the driver's seat forward and check that the head restraint moves downward according to the driver's seat position.





Warranty Information