Ignition Switch: Testing and Inspection

2GR-FSE STARTING: ENGINE SWITCH: INSPECTION

1. INSPECT ENGINE SWITCH
(a) Measure the resistance of the switch.
Standard resistance:










If the result is not as specified, replace the engine switch.
(b) Apply battery voltage between the terminals of the switch, and check the illumination condition of the switch.
HINT:
- If the positive (+) lead and the negative (-) lead are incorrectly connected, the engine switch indicator will not illuminate.
- If the voltage is too low, the indicator will not illuminate.

OK:










If the result is not as specified, replace the engine switch.