Removal

1UR-FSE ENGINE CONTROL SYSTEM: INTEGRATION RELAY: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait for 90 seconds after disconnecting the cable to prevent the airbag working.
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

2. REMOVE COOL AIR INTAKE DUCT SEAL Removal

3. REMOVE ENGINE ROOM SIDE COVER LH Removal

4. REMOVE INTEGRATION RELAY
(a) Remove the engine room No. 1 relay block cover.






(b) Using a screwdriver, detach the 2 claws and disconnect the integration relay from the engine room No. 2 relay block.
(c) Disconnect the 3 connectors.