Pinout Values and Diagnostic Parameters

MIRROR: POWER MIRROR CONTROL SYSTEM (w/ Memory): TERMINALS OF ECU

TERMINALS OF ECU

1. MEMORY MIRROR ECU ASSEMBLY






(a) Disconnect the R10 mirror ECU connector.

(b) Check the voltage or continuity of each terminal of the wire harness side connector.
Standard voltage:





If the result is not as specified, there may be a malfunction on the wire harness side.
(1) Reconnect the R10 mirror ECU connector, and check the voltage of terminal of the connector.
Standard voltage:






If the result is not as specified, the ECU may be malfunctioning.
Standard voltage:






If the result is not as specified, replace the mirror assembly, or the multiplex control system may be malfunctioning.
Standard voltage:






If the result is not as specified, the ECU may be malfunctioning.