Removal

2UZ-FE COOLING: WATER PUMP:

REMOVAL

1. REMOVE TIMING BELT
(a) Remove the timing belt Removal.
2. REMOVE WATER INLET HOUSING






(a) Disconnect the water bypass hose from the water inlet housing.
(b) Remove the 2 bolts holding the water inlet housing to the water pump.
(c) Disconnect the water inlet housing from the front water by-pass joint, and remove the water inlet housing with water inlet.
3. REMOVE WATER PUMP ASSEMBLY






(a) Remove the 5 bolts, 2 stud bolts, nut, water pump and gasket.
(b) Remove the O-ring from the water by-pass pipe.