Driver Side Seat Belt Warning Light Does Not Operate

METER: METER / GAUGE SYSTEM: Driver Side Seat Belt Warning Light does not Operate

Driver Side Seat Belt Warning Light does not Operate

WIRING DIAGRAM





INSPECTION PROCEDURE

PROCEDURE

1. INSPECT COMBINATION METER ASSEMBLY





(a) Disconnect the C11 connector.
(b) Measure the resistance according to the value(s) in the table below.
Standard resistance:






NG -- INSPECT FRONT SEAT INNER BELT ASSEMBLY LH
OK -- REPLACE COMBINATION METER ASSEMBLY
2. INSPECT FRONT SEAT INNER BELT ASSEMBLY LH





(a) Disconnect the B14 connector.
(b) Measure the resistance according to the value(s) in the table below.
Standard resistance:






NG -- REPLACE FRONT SEAT INNER BELT ASSEMBLY LH
OK -- REPAIR OR REPLACE HARNESS OR CONNECTOR