Installation

2UZ-FE ENGINE CONTROL SYSTEM: CAMSHAFT POSITION SENSOR:

INSTALLATION

1. INSTALL CAMSHAFT POSITION SENSOR






(a) Install the camshaft position sensor with the bolt and stud bolt.
Torque: 7.5 Nm (80 kgf-cm, 66 in-lbf)
(b) Reconnect the camshaft position sensor connector.
2. INSTALL TIMING BELT COVER SUB-ASSEMBLY NO. 3 LH Installation

3. INSTALL OIL COOLER PIPE Installation

4. INSTALL FAN AND GENERATOR V BELT Installation

5. ADD ENGINE COOLANT Service and Repair

6. CHECK FOR ENGINE COOLANT LEAKS On-Vehicle Inspection

7. INSTALL V-BANK COVER SUB-ASSEMBLY Installation