Installation

SUPPLEMENTAL RESTRAINT SYSTEM: SEAT POSITION SENSOR:

INSTALLATION

1. INSTALL SEAT POSITION AIRBAG SENSOR
(a) Check that the ignition switch is off.
(b) Check that the negative battery (-) terminal is disconnected.
CAUTION: After disconnecting the negative battery terminal, wait for at least 90 seconds before starting the operation.





(c) Install the seat position sensor with a new bolt.
Part Number:
Bolt
90119-06871
Torque: 8.0 Nm (82 kgf-cm, 71 in-lbf)
(d) Check that there is no looseness in the installation parts of the seat position sensor.
(e) Connect the connector to the seat position sensor.
2. INSTALL FRONT SEAT ASSEMBLY LH Installation

3. INSTALL SEAT TRACK COVER RH
4. INSTALL SEAT TRACK COVER LH
5. INSTALL SEAT TRACK BRACKET COVER INNER FRONT LH
6. INSTALL SEAT TRACK BRACKET COVER OUTER FRONT LH
7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
8. INSPECT SRS WARNING LIGHT
(a) Inspect the SRS warning light Diagnosis System.