Installation

BRAKE CONTROL: STEERING ANGLE SENSOR:

INSTALLATION

1. INSTALL STEERING ANGLE SENSOR






(a) Install the steering sensor.






(b) Install the steering sensor connector.
2. INSTALL TURN SIGNAL SWITCH ASSEMBLY
3. INSPECT SPIRAL CABLE Testing and Inspection

4. PLACE FRONT WHEELS FACING STRAIGHT AHEAD
5. INSTALL SPIRAL CABLE Installation

6. INSTALL STEERING COLUMN COVER Installation

7. INSTALL STEERING WHEEL ASSEMBLY Installation

8. INSTALL STEERING PAD Installation

9. INSTALL STEERING WHEEL COVER LOWER NO. 2
10. INSTALL STEERING WHEEL COVER LOWER NO. 3
11. CONNECT CABLE TO NEGATIVE BATTER TERMINAL
12. INSPECT SRS WARNING LIGHT
HINT: Diagnosis System

13. PERFORM STEERING ANGLE SENSOR ZERO POINT CALIBRATION
HINT: Calibration

14. CHECK VSC SENSOR SIGNAL
HINT: Test Mode Procedure