Scan Tool Testing and Procedures

STEERING COLUMN: POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM: DATA LIST / ACTIVE TEST

DATA LIST / ACTIVE TEST

1. DATA LIST
(a) Connect Techstream to the DLC3.
(b) Turn the ignition switch to the ON position.
(c) Operate Techstream according to the steps on the display and select "Data List".

Tilt & Telescopic













2. PERFORM ACTIVE TEST
HINT: Using Techstream to perform the Active Tests allows relays, VSVs and actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active test early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active tests.

(a) Connect Techstream to the DLC3.
(b) Turn the engine switch on (IG).
(c) Turn the tester on.
(d) Enter the following menus:
(1) Select: Body / Tilt & Telescopic / Active Test /
(e) Check the values by referring to the table below.

Tilt & Telescopic