Installation

SUSPENSION: FRONT SUSPENSION LOWER NO. 1 ARM:

INSTALLATION

1. INSTALL FRONT LOWER ARM BUSH NO. 2 LH






(a) Using SST and a press, install a new lower arm bush No. 2 LH.
SST: 09710-26010
09710-05081
SST: 09950-60020
09951-00890
NOTE: Press the lower arm bush No. 2 in the lower arm at the bush positioning protrusions become perpendicular to the lower arm as shown in the illustration.

2. INSTALL FRONT LOWER ARM BUSH NO. 1 LH






(a) Using SST and a press, install a new lower arm bush No. 1 LH.
SST: 09223-00010
SST: 09612-30012
NOTE: Press the lower arm bush No. 1 in the lower arm at the bush positioning protrusions become parallel with the lower arm as shown in the illustration.

3. TEMPORARILY TIGHTEN FRONT SUSPENSION ARM SUB-ASSEMBLY LOWER NO. 1 LH






(a) Align the matchmarks on the camber adjust cam No. 2 and toe adjust cam sub-assembly, temporarily tighten the bolt and the nut.
(b) Install the front lower ball joint attachment LH, a new nut and a new cotter pin.
Torque: 140 Nm (1,430 kgf-cm, 103 ft-lbf)






(c) Install the front lower ball joint attachment LH with the 2 bolts.
Torque: 160 Nm (1,630 kgf-cm, 118 ft-lbf)
4. TEMPORARILY TIGHTEN FRONT SHOCK ABSORBER WITH COIL SPRING






(a) Install the front shock absorber with coil spring, the bolt and the washer, and temporarily tighten the nut.
5. INSTALL FRONT DISC WHEEL
Torque: 112 Nm (1,140 kgf-cm, 83 ft-lbf)
6. STABILIZE SUSPENSION
HINT: Service Precautions

7. FULLY TIGHTEN FRONT SUSPENSION ARM SUB-ASSEMBLY LOWER NO. 1 LH






(a) Fully tighten the bolt and the nut.
Torque: 135 Nm (1,380 kgf-cm, 100 ft-lbf)
8. FULLY TIGHTEN FRONT SHOCK ABSORBER WITH COIL SPRING






(a) Fully tighten the nut.
Torque: 135 Nm (1,380 kgf-cm, 100 ft-lbf)
9. INSPECT AND ADJUST FRONT WHEEL ALIGNMENT
HINT: Service and Repair