Installation

SUSPENSION CONTROL: HEIGHT CONTROL RESERVOIR:

INSTALLATION

1. INSTALL HEIGHT CONTROL RESERVOIR ASSEMBLY
(a) Install the height control reservoir assembly with the 2 bolts.
Torque: 29 Nm (300 kgf-cm, 21 ft-lbf)
2. CONNECT HEIGHT CONTROL TUBE NO. 7
(a) Install 2 new O-rings, a new plate, a new connector No. 2, and connect the height control tube No. 7.
NOTE: Refer to PRECAUTION of removal and installation of the height control tube Service Precautions.

3. CONNECT HEIGHT CONTROL TUBE NO. 6
(a) Install 2 new O-rings, a new plate, a new connector No. 2, and connect the height control tube No. 6.
NOTE: Refer to PRECAUTION of removal and installation of the height control tube Service Precautions.

4. CONNECT HEIGHT CONTROL TUBE NO. 2
(a) Coat 2 new O-rings with MP grease.
(b) Push the height control tube No. 2 in straight to connect it until the clip makes "click" sound.
(c) Install the holder.
5. CHECK AIR LEAK Adjustments