Removal

SUSPENSION CONTROL: HEIGHT CONTROL COMPRESSOR:

REMOVAL

1. REMOVE REAR DISC WHEEL
2. REMOVE QUARTER PANEL MUDGUARD REAR LH
3. REMOVE FUEL TANK FILLER PIPE PROTECTOR
(a) Remove the 4 clips and the fuel tank filler pipe protector.
4. REMOVE HEIGHT CONTROL COMPRESSOR COVER
(a) Remove the 3 clips and the height control compressor cover.
5. REMOVE HEIGHT CONTROL FILTER
(a) Disconnect the 2 clips and the 2 hoses.
(b) Remove the 2 bolts and the height control filter.
6. DISCONNECT HEIGHT CONTROL TUBE NO. 2






(a) Remove the holder.
(b) Spread the clip and slowly pull the height control tube No. 2 straight out.
NOTE: Do not remove the clip from the union except when replacing it.

(c) Remove the 2 O-rings.
7. REMOVE HEIGHT CONTROL COMPRESSOR ASSEMBLY






(a) Disconnect the connector.
(b) Remove the 3 clamps.






(c) Remove the 3 bolts.
(d) Disconnect the clip and remove the No. 1 hose.






(e) Remove the 3 bolts, the height control compressor and the dryer with the bracket.
(f) Remove the bolt, the dryer and the O-ring.
(g) Remove the 3 bushings from the height control compressor assembly.