Kinetic Dynamic Suspension System

SUSPENSION CONTROL: KINETIC DYNAMIC SUSPENSION SYSTEM: DATA LIST / ACTIVE TEST

DATA LIST / ACTIVE TEST

1. DATA LIST
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to the ON position.
(c) Following the display on the Techstream, read the Data List.

KDSS:





2. ACTIVE TEST LIST
HINT: Perform the Active Test using the Techstream to operate the sensors, relays and solenoids without removing any parts. Performing the Active Test is the first step of troubleshooting and is one of the methods to shorten labor time. It is possible to display the Data List during the Active Test.

(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to the ON position.
(c) Following the display on the Techstream, perform the Active Test.

KDSS: