Kinetic Dynamic Suspension System

SUSPENSION CONTROL: KINETIC DYNAMIC SUSPENSION SYSTEM:

PROBLEM SYMPTOMS TABLE
HINT:
- If a normal system code is displayed during the DTC check but the problem still occurs, check the circuits for each problem symptom in the order given in the table below and proceed to the relevant troubleshooting procedure.
- Inspect the fuse before inspecting the suspected areas as shown in the chart below.
- Inspect each malfunction circuit in numerical order for the corresponding symptom.
- If the malfunction still exists even after checking and confirming that all the circuits are normal, replace the suspension control ECU.





HINT: *1: Replace the stabilizer control with bracket valve assembly, as the valve may be malfunctioning.
*2: Replace the front and rear cylinders, as there may be fluid leaks from the upper/lower chambers of the cylinder.