Installation

DIFFERENTIAL: REAR DIFFERENTIAL CARRIER OIL SEAL:

INSTALLATION

1. INSTALL REAR DIFFERENTIAL DRIVE PINION BEARING SPACER






(a) Install a new rear differential drive pinion bearing spacer.
2. INSTALL DIFFERENTIAL OIL STORAGE RING
(a) Using a brass bar and a hammer, install a new oil storage ring.
3. INSTALL REAR DRIVE PINION FRONT TAPERED ROLLER BEARING






(a) Using SST and a hammer, install a new tapered roller bearing (outer).
SST: 09316-60011
09316-00011
09316-00021
(b) Install the tapered roller bearing (inner).
4. INSTALL REAR DIFFERENTIAL DRIVE PINION OIL SLINGER
5. INSTALL REAR DIFFERENTIAL CARRIER OIL SEAL






(a) Using SST and a hammer, install a new rear differential carrier oil seal.
SST: 09554-30011
Oil seal drive in depth:
0.55 to 1.45 mm (0.021 to 0.057 in.)
(b) Coat the oil seal lip with MP grease.
6. INSTALL REAR DRIVE PINION COMPANION FLANGE SUB-ASSEMBLY






(a) Using SST, install the rear drive pinion companion flange sub-assembly.
SST: 09950-30012
09951-03010
09953-03010
09954-03010
09955-03030
09956-03030
(b) Coat the threads of a new nut with hypoid gear oil LSD.






(c) Using SST to hold the rear pinion companion flange, tighten the nut.
SST: 09330-00021
09330-00030
Torque: 370 Nm (3,770 kgf-cm, 273 ft-lbf)
7. INSPECT DIFFERENTIAL DRIVE PINION PRELOAD






(a) Using a torque wrench, measure the preload.
New bearing:
1.05 to 1.64 N*m (10.7 to 16.7 kgf*cm, 9.3 to 14.5 in.*lbf)
Reused bearing:
0.56 to 0.85 N*m (5.7 to 8.7 kgf*cm, 5.0 to 7.5 in.*lbf)
8. INSTALL REAR DRIVE PINION NUT






(a) Using a chisel and a hammer, stake the drive pinion companion flange nut.
9. INSTALL PROPELLER SHAFT ASSEMBLY Installation

10. FILL UP DIFFERENTIAL OIL Adjustments

11. INSPECT DIFFERENTIAL OIL Adjustments