Removal
DIFFERENTIAL: FRONT DIFFERENTIAL CARRIER ASSEMBLY:
REMOVAL
1. REMOVE FRONT WHEELS
2. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY
3. REMOVE ENGINE UNDER COVER ASSEMBLY REAR
4. DRAIN DIFFERENTIAL OIL Adjustments
5. REMOVE PROPELLER SHAFT ASSEMBLY FRONT Removal
6. SEPARATE FRONT SPEED SENSOR LH Removal
7. SEPARATE FRONT SPEED SENSOR RH
HINT: Remove the RH side by the same procedures as for the LH side.
8. REMOVE FRONT AXLE HUB GREASE CAP LH Removal
9. REMOVE FRONT AXLE HUB GREASE CAP RH
HINT: Remove the RH side by the same procedures as for the LH side.
10. REMOVE FRONT AXLE SHAFT LH NUT Removal
11. REMOVE FRONT AXLE SHAFT RH NUT
HINT: Remove the RH side by the same procedures as for the LH side.
12. SEPARATE FRONT STABILIZER LINK ASSEMBLY LH Removal
13. SEPARATE FRONT STABILIZER LINK ASSEMBLY RH
HINT: Remove the RH side by the same procedures as for the LH side.
14. SEPARATE TIE ROD END SUB-ASSEMBLY LH Removal
15. SEPARATE TIE ROD END SUB-ASSEMBLY RH
HINT: Remove the RH side by the same procedures as for the LH side.
16. REMOVE NO. 1 FRONT SUSPENSION ARM SUB-ASSEMBLY LOWER LH Removal
17. REMOVE NO. 1 FRONT SUSPENSION ARM SUB-ASSEMBLY LOWER RH
HINT: Remove the RH side by the same procedures as for the LH side.
18. SEPARATE FRONT AXLE ASSEMBLY LH Removal
19. SEPARATE FRONT AXLE ASSEMBLY RH
HINT: Remove the RH side by the same procedures as for the LH side.
20. REMOVE FRONT DRIVE SHAFT ASSEMBLY LH Removal
21. REMOVE FRONT DRIVE SHAFT ASSEMBLY RH
HINT: Remove the RH side by the same procedures as for the LH side.
SST: 09520-01010
SST: 09520-24010
09520-32040
22. REMOVE FRONT DIFFERENTIAL CARRIER ASSEMBLY
(a) Remove the bolt and separate the front differential breather tube bracket.
(b) Support the front differential with a jack.
(c) Remove the front differential mount nut No. 1.
(d) Remove the 2 front mounting bolts and 2 nuts.
(e) Lower the jack and remove the front differential assembly.
(f) Remove the 2 bolts and No. 3 front differential support.
(g) Remove the 5 bolts and 2 front differential supports.