Operation CHARM: Car repair manuals for everyone.

Removal








DIFFERENTIAL: REAR DIFFERENTIAL CARRIER ASSEMBLY:

REMOVAL

1. REMOVE REAR WHEEL
2. REMOVE PROPELLER SHAFT ASSEMBLY Removal

3. REMOVE REAR AXLE HOUSING FILLER PLUG
4. REMOVE REAR AXLE HOUSING DRAIN PLUG
5. REMOVE REAR DISC BRAKE CALIPER ASSEMBLY LH
HINT: Removal

6. REMOVE REAR DISC BRAKE CALIPER ASSEMBLY RH
HINT: Remove the RH side by the same procedures as for the LH side.

7. REMOVE REAR DISC LH Disassembly

8. REMOVE REAR DISC RH
HINT: Remove the RH side by the same procedures as for the LH side.

9. REMOVE PARKING BRAKE SHOE RETURN TENSION SPRING Disassembly

10. REMOVE PARKING BRAKE SHOE RETURN TENSION SPRING
HINT: Remove the RH side by the same procedures as for the LH side.

11. REMOVE PARKING BRAKE SHOE STRUT COMPRESSION SPRING Disassembly

12. REMOVE PARKING BRAKE SHOE STRUT COMPRESSION SPRING
HINT: Remove the RH side by the same procedures as for the LH side.

13. REMOVE PARKING BRAKE SHOE STRUT LH
14. REMOVE PARKING BRAKE SHOE STRUT RH
HINT: Remove the RH side by the same procedures as for the LH side.

15. REMOVE PARKING BRAKE SHOE LH Disassembly

16. REMOVE PARKING BRAKE SHOE RH
HINT: Remove the RH side by the same procedures as for the LH side.

17. SEPARATE SPEED SENSOR REAR LH Removal

18. SEPARATE SPEED SENSOR REAR RH
HINT: Remove the RH side by the same procedures as for the LH side.

19. SEPARATE NO. 3 PARKING BRAKE CABLE ASSEMBLY Removal

20. SEPARATE NO. 2 PARKING BRAKE CABLE ASSEMBLY
HINT: Remove the No. 2 parking brake cable assembly by the same procedures as for the No. 3 parking brake cable assembly.

21. REMOVE REAR AXLE SHAFT LH Removal

22. REMOVE REAR AXLE SHAFT RH
HINT: Remove the RH side by the same procedures as for the LH side.

23. REMOVE REAR AXLE SHAFT LH OIL SEAL Removal

24. REMOVE REAR AXLE SHAFT RH OIL SEAL
HINT: Remove the RH side by the same procedures as for the LH side.

SST: 09308-00010
25. REMOVE REAR DIFFERENTIAL CARRIER ASSEMBLY






(a) Remove the 10 nuts and differential carrier assembly.
NOTE: Be careful not to damage the removal surface.