Removal

WIPER AND WASHER: FRONT WIPER MOTOR:

REMOVAL

1. REMOVE FRONT WIPER ARM HEAD CAP






(a) Using a small screwdriver, remove the 2 front wiper arm head cap.
HINT: Tape the screwdriver tip before use.

2. REMOVE FR WIPER ARM RH
(a) Operate the wiper and stop the windshield wiper motor assembly at the automatic stop position.
(b) Remove the nut and FR wiper arm RH.
3. REMOVE FR WIPER ARM LH
(a) Remove the nut and FR wiper arm LH.
4. REMOVE FRONT FENDER TO COWL SIDE SEAL LH






(a) Release the 2 claws, and remove the front fender to cowl side seal LH.
5. REMOVE FRONT FENDER TO COWL SIDE SEAL RH
6. REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY






(a) Remove the 2 clips.
(b) Using a clipremover, disengage the meshing of 12 clips.
7. REMOVE WINDSHIELD WIPER MOTOR AND LINK






(a) Disconnect the connector and remove the 2 bolts.
(b) Slide the wiper link assembly to vehicle's passenger's side. Disengage the meshing of the rubber pin and remove the wiper link assembly.
8. REMOVE WINDSHIELD WIPER MOTOR ASSEMBLY






(a) Using a screwdriver and disengage the meshing of 2 rods at the crank arm pivot of the windshield wiper motor assembly.
HINT: Tape the screwdriver tip before use.





(b) Remove the 2 "torx" bolts and windshield wiper motor assembly.