Installation

WIPER AND WASHER: REAR WIPER MOTOR:

INSTALLATION

1. INSTALL REAR WIPER MOTOR ASSEMBLY
(a) Install the rear wiper motor assembly with the 3 bolts.
Torque: 5.5 Nm (56 kgf-cm, 49 in-lbf)
(b) Connect the connector.
2. INSTALL REAR WIPER ARM ASSEMBLY






(a) Scrape off the serration part of the wiper arm with a round file or equivalent.
(b) Clean the rear wiper pivot serration with a wire brush.






(c) Stop the rear wiper motor assembly at the automatic stop position. Install the rear wiper arm at the position as shown in the illustration.
Torque: 5.5 Nm (56 kgf-cm, 49 in-lbf)
3. INSTALL BACK DOOR SERVICE HOLE COVER