Removal

AUDIO / VISUAL: NETWORK GATEWAY ECU:

REMOVAL
NOTE: When disassembling the network gateway ECU, eliminate static electricity by touching the vehicle body to prevent the components from being damaged.

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait for 90 seconds after disconnecting the cable to prevent airbag deployment Service Precautions.

2. REMOVE FRONT DOOR SCUFF PLATE
HINT: Removal procedure of the RH side is the same as that of the LH side Removal.

3. REMOVE FRONT DOOR OPENING TRIM COVER
HINT: Removal procedure of the RH side is the same as that of the LH side Removal.

4. REMOVE SIDE INSTRUMENT PANEL Removal

5. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Removal

6. REMOVE FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY Removal

7. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY Removal

8. REMOVE NETWORK GATEWAY ECU
(a) Disconnect the connector.

(b) Disengage the 2 claws and remove the cover.