Removal

2GR-FSE ENGINE CONTROL SYSTEM: CRANKSHAFT POSITION SENSOR:

REMOVAL

1. REMOVE COOL AIR INTAKE DUCT SEAL Removal

2. REMOVE V-BANK COVER SUB-ASSEMBLY Removal

3. REMOVE NO. 1 INLET AIR CLEANER Removal

4. DISCHARGE REFRIGERANT FROM REFRIGERATION SYSTEM Removal

5. REMOVE V-RIBBED BELT Removal

6. REMOVE ENGINE UNDER COVER
7. REMOVE REAR ENGINE UNDER COVER LH
8. DISCONNECT NO. 1 COOLER REFRIGERANT SUCTION HOSE Removal

9. DISCONNECT DISCHARGE HOSE SUB-ASSEMBLY Removal

10. REMOVE COMPRESSOR WITH PULLEY ASSEMBLY Removal

11. REMOVE CRANKSHAFT POSITION SENSOR






(a) Disconnect the crankshaft position sensor connector.
(b) Remove the bolt and crankshaft position sensor.