Electric Parking Brake System
PARKING BRAKE: ELECTRIC PARKING BRAKE SYSTEM: U0073/51: Control Module Communication Bus OFF
DTC U0073/51 - Control Module Communication Bus OFF
DTC U0100/53 - Lost Communication with ECM/PCM
DTC U0124/55 - Lost Communication with Lateral Acceleration Sensor Module
DTC U0129/52 - Lost Communication with Brake System Control Module
DTC U0293/54 - Lost Communication with HV ECU
DESCRIPTION
The electric parking brake ECU uses CAN communication with the ECM, skid control ECU and hybrid vehicle control ECU.
INSPECTION PROCEDURE
PROCEDURE
1. CHECK DTC
(a) Turn the power switch OFF.
(b) Connect the intelligent tester or Techstream to the DLC3.
(c) Turn the power switch ON (IG) and the tester ON.
(d) Clear the DTC Reading and Clearing Diagnostic Trouble Codes.
(e) Turn the power switch OFF.
(f) Turn the power switch ON (IG) and check for DTC.
Result
B -- USE SIMULATION METHOD TO CHECK
A -- GO TO CAN COMMUNICATION SYSTEM (HOW TO PROCEED WITH TROUBLESHOOTING)