Removal

3UR-FE EMISSION CONTROL: AIR INJECTION DRIVER: REMOVAL

1. REMOVE ENGINE ROOM SIDE COVER LH Removal

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.
- w/ Navigation System:
After the engine switch is turned off, the HDD navigation system requires approximately 6 minutes to record various types of memory and settings. As a result, after turning the engine switch off, wait 6 minutes or more before disconnecting the cable from the negative (-) battery terminal.

3. REMOVE AIR INJECTION CONTROL DRIVER ASSEMBLY






(a) Remove the bolt and disconnect the ground wire.
(b) Disconnect the wire harness clamp.






(c) Disconnect the 4 air injection control driver connectors.






(d) Remove the 3 bolts and air injection control driver.