Removal

3UR-FE ENGINE CONTROL: IGNITION COIL AND SPARK PLUG: REMOVAL

1. REMOVE NO. 2 ENGINE UNDER COVER Removal

2. REMOVE ENGINE ROOM SIDE COVER LH Removal

3. REMOVE ENGINE ROOM SIDE COVER RH Removal

4. REMOVE UPPER RADIATOR SUPPORT SEAL Removal

5. REMOVE V-BANK COVER SUB-ASSEMBLY Removal

6. REMOVE AIR CLEANER HOSE ASSEMBLY Removal

7. REMOVE AIR CLEANER ASSEMBLY Removal

8. DISCONNECT WATER BY-PASS PIPE ASSEMBLY






(a) Remove the 2 bolts and disconnect the water by-pass pipe from the cylinder head cover and timing chain cover.






(b) Remove the 3 bolts and disconnect the water by-pass pipe from the cylinder head cover.
9. REMOVE IGNITION COIL ASSEMBLY






(a) Disconnect the 8 ignition coil connectors.
(b) Remove the 8 bolts and 8 ignition coils.
10. REMOVE SPARK PLUG
(a) Remove the 8 spark plugs.