Removal

EXTERIOR: REAR BUMPER: REMOVAL

REMOVAL

1. REMOVE REAR FLOOR FINISH PLATE






(a) Remove the 2clips (A).
(b) Using a screwdriver, disengage the 2 claws, 6 clips (B) and remove the finish plate.
HINT: Tape the screwdriver tip before use.

2. REMOVE DECK FLOOR BOX REAR Removal

3. REMOVE DECK SIDE TRIM BOX Removal

4. REMOVE REAR BUMPER SIDE SEAL
(a) Remove the clip, nut, bolt and side seal.
5. REMOVE FUEL TANK FILLER PIPE PROTECTOR
(a) Remove the 2 clips, bolt and protector.
6. REMOVE REAR BUMPER COVER






(a) Put protective tape under the quarter panel.
(b) Remove the 2 clips and nuts.
(c) With Air suspension system:
Remove the 6 screws.
(d) Without Air suspension system:
Remove the 4 screws.
(e) Using a screwdriver, disengage the 10 claws and remove the bumper cover.
HINT: Tape the screwdriver tip before use.