Removal

ENGINE HOOD / DOOR: FUEL LID OPENER MOTOR ASSEMBLY: REMOVAL

REMOVAL

1. REMOVE TONNEAU COVER ASSEMBLY
2. REMOVE DECK BOARD SUB-ASSEMBLY Removal

3. REMOVE DECK FLOOR BOX FRONT Removal

4. REMOVE DECK FLOOR BOX REAR Removal

5. REMOVE DECK NO.2 BOARD SUB-ASSEMBLY Removal

6. REMOVE DECK NO.3 BOARD SUB-ASSEMBLY Removal

7. REMOVE DECK SIDE TRIM LH COVER Removal

8. REMOVE REAR FLOOR FINISH PLATE Removal

9. REMOVE DECK SIDE TRIM LH BOX Removal

10. REMOVE REAR DOOR SCUFF LH PLATE Removal

11. REMOVE REAR DOOR OPENING TRIM LH WEATHERSTRIP
12. REMOVE REAR SEAT SIDE LH COVER Removal

13. REMOVE REAR FLOOR FINISH SIDE LH PLATE Removal

14. REMOVE ROPE HOOK Removal

15. REMOVE DECK TRIM SIDE LH PANEL ASSEMBLY Removal

16. REMOVE ROOF SIDE LH GARNISH ASSEMBLY INNER Removal

17. REMOVE FUEL LID OPENER MOTOR ASSEMBLY






(a) Disconnect the connector.
(b) Release the lock as shown in the illustration.
(c) Remove the nut and fuel filler opening lid lock sub-assembly.
18. REMOVE FUEL FILLER OPENING LID LOCK RETAINER