Sliding Roof System (for Standard)

SLIDING ROOF: SLIDING ROOF SYSTEM (for Standard): TERMINALS OF ECU

TERMINALS OF ECU

1. CHECK SLIDING ROOF DRIVE GEAR ASSEMBLY (SLIDING ROOF ECU)






(a) Disconnect the M12 ECU connector.

(b) Check the voltage and resistance of each terminal of the wire harness side connector.

Voltage





Resistance





If the result is not as specified, there may be a malfunction on the wire harness side.
(c) Reconnect the M12 ECU connector.
(d) Check the voltage and resistance of each terminal of the connector.

Resistance





If the result is not as specified, the sliding roof ECU may have a malfunction.
2. CHECK INSTRUMENT PANEL J/B ASSEMBLY (MULTIPLEX NETWORK BODY ECU)
(a) Disconnect the 1D, 1F and 1M J/B connectors.





(b) Check the voltage and resistance between each terminal of the wire harness side connectors and body ground.

Voltage





Resistance





If the result is not as specified, there may be a malfunction on the wire harness side.
3. CHECK POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY
(a) Disconnect the P22 ECU connector.





(b) Check the voltage and resistance of each terminal of the wire harness side connectors.

Voltage





Resistance





If the result is not as specified, there may be a malfunction on the wire harness side.