Removal

BRAKE CONTROL: STEERING ANGLE SENSOR: REMOVAL

REMOVAL

1. PRECAUTION Service Precautions

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected. Repair Instruction - Initialization

3. PLACE FRONT WHEELS FACING STRAIGHT AHEAD
4. REMOVE STEERING PAD Removal

5. REMOVE STEERING WHEEL ASSEMBLY (for Manual Tilt) Removal

6. REMOVE STEERING WHEEL ASSEMBLY (for Power Tilt and Power Telescopic Steering Column) Removal

7. REMOVE STEERING COLUMN COVER (for Manual Tilt) Removal

8. REMOVE STEERING COLUMN COVER (for Power Tilt and Power Telescopic Steering Column) Removal

9. REMOVE SPIRAL CABLE Removal

10. REMOVE STEERING ANGLE SENSOR






(a) Release 6 claw fittings and remove the steering angle sensor from the spiral cable.