Removal

BRAKE CONTROL: VSC OFF SWITCH: REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected. Repair Instruction - Initialization

2. REMOVE FRONT DOOR SCUFF PLATE
HINT: Use the same procedures described for the RH side. Removal

3. REMOVE COWL SIDE TRIM SUB-ASSEMBLY Removal

4. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY Removal

5. REMOVE VSC OFF SWITCH






(a) Disengage the 2 claws and remove the VSC off switch.