Installation

BRAKE CONTROL: YAW RATE AND ACCELERATION SENSOR: INSTALLATION

INSTALLATION

1. INSTALL YAW RATE SENSOR






(a) Install the yaw rate sensor with the 2 bolts.
Torque: 14 Nm (143 kgf-cm, 10 ft-lbf)
(b) Connect the connector.
2. INSTALL YAW RATE SENSOR PROTECTOR






(a) Install the sensor protector with the bolt.
3. INSTALL CENTER PILLAR GARNISH LOWER RH
4. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH
5. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH
6. INSTALL REAR DOOR SCUFF PLATE RH
7. INSTALL FRONT DOOR SCUFF PLATE RH
8. INSTALL FRONT SEAT ASSEMBLY RH Installation

9. PERFORM YAW RATE SENSOR ZERO POINT CALIBRATION Calibration