Removal

2GR-FE LUBRICATION: ENGINE OIL COOLER (w/ Oil Cooler): REMOVAL

REMOVAL

1. REMOVE NO. 1 ENGINE UNDER COVER
2. REMOVE EXHAUST PIPE ASSEMBLY
Removal
3. DRAIN ENGINE COOLANT Testing and Inspection

4. DRAIN ENGINE OIL Replacement

5. REMOVE NO. 2 MANIFOLD STAY Removal

6. REMOVE NO. 2 EXHAUST MANIFOLD HEAT INSULATOR Removal

7. REMOVE EXHAUST MANIFOLD SUB-ASSEMBLY LH Removal

8. REMOVE ENGINE OIL COOLER






(a) Remove the bolt, 2 clamps, and 4 clips and disconnect the 2 water by-pass hoses.






(b) Remove the oil cooler union bolt, oil cooler assembly, and O-ring.