Installation

AUDIO / VISUAL: VOLTAGE INVERTER: INSTALLATION

INSTALLATION

1. INSTALL VOLTAGE INVERTER






(a) Connect the connector.
(b) Install the voltage inverter with the 3 nuts.
2. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH
3. INSTALL ROPE HOOK
4. INSTALL REAR SEAT SIDE COVER LH
5. INSTALL REAR NO.1 SEAT BELT ASSEMBLY OUTER LH
6. INSTALL DECK SIDE TRIM COVER LH
7. INSTALL REAR FLOOR FINISH SIDE PLATE LH
8. INSTALL REAR FLOOR FINISH PLATE
9. INSTALL DECK SIDE TRIM BOX LH
10. INSTALL DECK SIDE TRIM BOX RH
11. INSTALL BACK DOOR WEATHERSTRIP
12. INSTALL DECK NO.3 BOARD SUB-ASSEMBLY
13. INSTALL DECK NO.2 BOARD SUB-ASSEMBLY
14. INSTALL DECK FLOOR BOX REAR
15. INSTALL DECK FLOOR BOX FRONT
16. INSTALL JACK CARRIER ASSEMBLY
17. INSTALL JACK ASSEMBLY
18. INSTALL JACK CARRIER SUPPORT
19. INSTALL TONNEAU COVER ASSEMBLY
20. INSTALL DECK BOARD SUB-ASSEMBLY
21. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH
22. INSTALL REAR DOOR SCUFF PLATE LH
23. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
24. PERFORM INITIALIZATION Repair Instruction - Initialization
NOTE: Some systems need initialization when disconnecting the cable from negative battery terminal.