Installation

2GR-FE ENGINE CONTROL SYSTEM: ACCELERATOR PEDAL ROD: INSTALLATION

INSTALLATION

1. INSTALL ACCELERATOR PEDAL ROD
NOTICE:
- Avoid physical shock to the accelerator pedal assembly.
- Do not disassemble the accelerator pedal assembly.





(a) Install the accelerator pedal rod with the 2 nuts.
Torque: 4.9 Nm (50 kgf-cm, 43 in-lbf)
(b) Connect the accelerator pedal position sensor connector.
2. INSTALL FLOOR CARPET COVER CENTER LH