Removal

SEAT BELT: FRONT SEAT OUTER BELT ASSEMBLY: REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait for 90 seconds after disconnecting the cable to prevent the airbag working Service Precautions.

2. REMOVE FRONT DOOR SCUFF PLATE Removal

3. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP
4. REMOVE REAR DOOR SCUFF PLATE Removal

5. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP
6. REMOVE LAP BELT OUTER ANCHOR COVER






(a) Disengage the 2 claws and remove the lap belt outer anchor cover.
7. DISCONNECT FRONT SEAT OUTER BELT ASSEMBLY
(a) Remove the bolt and disconnect the floor side of the front seat outer belt assembly.
8. REMOVE CENTER PILLAR GARNISH LOWER Removal

9. REMOVE CENTER PILLAR GARNISH Removal

10. REMOVE FRONT SEAT OUTER BELT ASSEMBLY
(a) Turn the ignition switch to the Lock position.
(b) Remove the nut and disengage the shoulder side of the front seat outer belt assembly.






(c) Using a screwdriver, pull out the locking button in the direction shown by the arrow to release the lock, and disconnect the pretensioner connector.
HINT: Tape the screwdriver tip before use.

(d) Disconnect the tension reducer connector.






(e) Remove the 2 bolts and front seat outer belt assembly.