Installation

SEAT BELT: REAR CENTER SEAT INNER BELT ASSEMBLY: INSTALLATION

INSTALLATION

1. INSTALL REAR CENTER SEAT INNER BELT ASSEMBLY
(a) Install the rear center seat inner belt assembly with the bolt.
Torque: 42 Nm (428 kgf-cm, 31 ft-lbf)
NOTICE:
- Tighten the bolt while the claws of the rear center seat inner belt assembly are in contact with the vehicle body.
- Claw 1 shown in the illustration can have a clearance of up to 2.0 mm (0.08 in.) between the claw and the vehicle body.
HINT: Place the buckle of the rear center seat inner belt assembly somewhere on the floor carpet so that the buckle does not interfere with installation of the seat.

2. INSTALL REAR SEAT ASSEMBLY LH Installation

3. INSTALL REAR SEAT TRACK BRACKET COVER
4. INSPECT SLIDE ADJUSTER LOCK Installation