Removal

SUPPLEMENTAL RESTRAINT SYSTEM: SIDE AIRBAG SENSOR: REMOVAL

REMOVAL
HINT:
- Use the same procedures for the RH side and LH side.
- The procedures listed below are for the LH side.

1. PRECAUTION
CAUTION: Be sure to read the "PRECAUTION" thoroughly before servicing Service Precautions.

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait for 90 seconds after disconnecting the cable to prevent the airbag working.
NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected. Repair Instruction - Initialization

3. REMOVE FRONT DOOR SCUFF LH PLATE Removal

4. REMOVE REAR DOOR SCUFF LH PLATE Removal

5. REMOVE FRONT DOOR OPENING TRIM LH WEATHERSTRIP
6. REMOVE REAR DOOR OPENING TRIM LH WEATHERSTRIP
7. REMOVE LAP BELT OUTER ANCHOR COVER Removal

8. REMOVE CENTER PILLAR LH GARNISH LOWER
Removal

9. REMOVE FRONT SEAT OUTER BELT ASSEMBLY Removal

10. REMOVE SIDE AIRBAG SENSOR LH






(a) Remove the 2 bolts and the side airbag sensor LH.
(b) Disconnect the connector from the side airbag sensor LH.