Installation

AUDIO / VISUAL: STEERING PAD SWITCH: INSTALLATION

INSTALLATION

1. INSTALL STEERING PAD SWITCH ASSEMBLY






(a) Engage the 2 claws and the pin.
(b) Install the steering pad switch RH with the screw.






(c) Engage the 2 claws and the pin.
(d) Install the steering pad switch LH with the screw.
(e) Connect each connector.
2. INSTALL STEERING PAD Installation

3. INSTALL LOWER NO.3 STEERING WHEEL COVER Installation

4. INSTALL LOWER NO.2 STEERING WHEEL COVER Installation

5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
6. PERFORM INITIALIZATION Repair Instruction - Initialization
NOTE: Some systems need initialization when disconnecting the cable from the negative battery terminal.

7. INSPECT STEERING PAD
Steering Pad.
8. INSPECT SRS WARNING LIGHT
Diagnosis System