Crankshaft Main Bearing

Torque: 61 Nm (622 kgf-cm, 45 ft-lbf)

Step 2

Mark the front of the bearing cap bolts with paint.
Retighten the bearing cap bolts 90° in the order above.
Check that the painted mark is now at a 90° angle to the front.

Torque: 52 Nm (525 kgf-cm, 38 ft-lbf)

Bolt Length:

CRANKSHAFT
Maximum circle runout: 0.06 mm (0.0024 in.)
Standard journal diameter: 60.988 to 61.000 mm (2.4011 to 2.4016 in.)
Maximum taper and out-of-round: 0.02 mm (0.0008 in.)

CRANKSHAFT BEARING CAP SET BOLT
Standard diameter: 10.8 to 11.0 mm (0.4252 to 0.4331 in.)
Minimum diameter: 10.7 mm (0.4213 in.)
Measuring Point: 40 mm (1.57 in.)

CRANKSHAFT THRUST CLEARANCE
Standard thrust clearance: 0.04 to 0.24 mm (0.0016 to 0.0094 in.)
Maximum thrust clearance: 0.30 mm (0.0118 in.)
Thrust washer thickness: 2.43 to 2.48 mm (0.0957 to 0.0976 in.)

CRANKSHAFT OIL CLEARANCE
Standard oil clearance: 0.026 to 0.047 mm (0.0010 to 0.0019 in.)
Maximum oil clearance: 0.050 mm (0.0020 in.)