Installation

OTHER SYSTEM: REAR POWER POINT SOCKET: INSTALLATION

INSTALLATION

1. INSTALL REAR POWER OUTLET SOCKET COVER






(a) Engage the 2 claws and install the rear power outlet socket cover.
2. INSTALL REAR POWER POINT SOCKET






(a) Place the rear power point socket with the notch on the power point socket cover, and push in the rear power point socket as hard as possible to install it.
3. INSTALL ROOF SIDE GARNISH ASSEMBLY INNER LH
4. INSTALL NO.1 TONNEAU COVER HOLDER CAP
5. INSTALL NO.2 ROOM LIGHT ASSEMBLY
6. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH
7. INSTALL ROPE HOOK
8. INSTALL REAR SEAT SIDE COVER LH
9. INSTALL REAR NO.1 SEAT OUTER BELT ASSEMBLY LH
(a) Install the rear No. 1 seat outer belt assembly LH with the bolt.
Torque: 42 Nm (428 kgf-cm, 31 ft-lbf)
10. INSTALL DECK SIDE TRIM COVER LH
11. INSTALL REAR FLOOR FINISH SIDE PLATE LH
12. INSTALL REAR FLOOR FINISH PLATE
13. INSTALL DECK SIDE TRIM BOX LH
14. INSTALL DECK SIDE TRIM BOX RH
15. INSTALL BACK DOOR WEATHERSTRIP
16. INSTALL NO.3 DECK BOARD SUB-ASSEMBLY
17. INSTALL NO.2 DECK BOARD SUB-ASSEMBLY
18. INSTALL DECK FLOOR BOX REAR
19. INSTALL DECK FLOOR BOX FRONT
20. INSTALL JACK CARRIER ASSEMBLY
21. INSTALL JACK ASSEMBLY
22. INSTALL JACK CARRIER SUPPORT
23. INSTALL TONNEAU COVER ASSEMBLY
24. INSTALL DECK BOARD SUB-ASSEMBLY
25. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH
26. INSTALL REAR DOOR SCUFF PLATE LH